Close Sidebar
![[IMG]](http://helipilotonline.com/wp-content/uploads/2015/06/HeliPilot-Bobby-Watts-Photo-1-590x782.png)
Story Chris Reibert, Photos Jenni Orebaugh
Known for his great SmackTalk videos with Bert Kammerer and designing items like the Delcon System, Bobby Watts is a household name in the RC world. Although you won’t find Bobby on the competition circuit anymore, he is more active in the hobby than ever. With his new company, Encore RC, and still working closely with Gaui and Halo Blades, I don’t know if this guy ever sleeps. I was lucky enough to hang out with Bobby at his house...
![[IMG]](http://i232.photobucket.com/albums/ee177/TOGlightbolb/11103081_797599733662724_619438335639534512_o_zpsgv04u9sg.jpg)
A Swiss knife designed by a German made in Asia = F@#rrrrrken awesome
Pre-flight check -
Check lipo voltage
Check servo swash movement
Check blue light on spartan
fly and try and break it.
150 flights
Rinse and repeat
![[IMG]](http://helipilotonline.com/wp-content/uploads/2015/06/HeliPilot-Part-1-Photo-1-590x432.png)
Mountainside pinnacle LZ with Hubsan EC 145
Story and Photos by Gordon Broadfoot
Dioramas bring life to your helicopter operations.
From the first week that I flew a small co-axial helicopter, I knew that I wanted to fly more authentic-styled helicopters and have proper landing zones (LZ’s) for the missions I intended to fly indoors with micro-sized helis.
I can certainly appreciate a big open floor with a soft rug to land on, like a big open field of deep grass. That is...
Heligods - The International RC Helicopter Forum
Learn to Fly 3d RC Helicopters
Story Chris Reibert, Photos Jenni Orebaugh
Known for his great SmackTalk videos with Bert Kammerer and designing items like the Delcon System, Bobby Watts is a household name in the RC world. Although you won’t find Bobby on the competition circuit anymore, he is more active in the hobby than ever. With his new company, Encore RC, and still working closely with Gaui and Halo Blades, I don’t know if this guy ever sleeps. I was lucky enough to hang out with Bobby at his house...
Question?
Does Servo Resoulution Matter?
Ok its my preference for a fast and accurate servo over a slow grunty servo. But one specification i never see mentioned is the servo RESOLUTION.. so why don't servo manufacturers quote servo resolution? Is it because it is largely determined by the gyro/radio/receiver?
If i am flying a heli fast then speed and the accuracy of the servo are critical (providing ENOUGH torque is there to cater for maximum load).
Any thoughts?
...
If i am flying a heli fast then speed and the accuracy of the servo are critical (providing ENOUGH torque is there to cater for maximum load).
Any thoughts?
...
Vendor Notice - Mad4heli
Gen Ace Batteries
Gens Ace Packs in stock right now!!! 6S 5000 60C 7S 5000 60C
check them out !!!
http://mad4heli.com/collections/gens-ace
check them out !!!
http://mad4heli.com/collections/gens-ace
Info
Chronos
A Swiss knife designed by a German made in Asia = F@#rrrrrken awesome
Pre-flight check -
Check lipo voltage
Check servo swash movement
Check blue light on spartan
fly and try and break it.
150 flights
Rinse and repeat
I've just finished the build and test flight of my first Goblin a 380.
All good so far.
Thanks to @ZEN RC for supplying the kit
All good so far.
Thanks to @ZEN RC for supplying the kit
Notice
Wow ! New Goblin Speed
The awesomeness of my husband has revealed itself yet again. This time he surprised me with two sets of main blade covers from Wing Tote. His reason? He didn`t want to see my nice looking blades get banged up on the way to and from the flying field.
The blade covers are very high quality, and will fit 600/720mm main blades. No need for a blade holder either. They have a velcro strap that goes around the tail boom, and back around itself to hold the covers to the boom.
The blade covers are very high quality, and will fit 600/720mm main blades. No need for a blade holder either. They have a velcro strap that goes around the tail boom, and back around itself to hold the covers to the boom.
Breaking News
Neil Gennard - Raptor E700ngx Nitro Conversion
Raptor E700NGX nitro conversion being put to the test to see how good it really is.
Mountainside pinnacle LZ with Hubsan EC 145
Story and Photos by Gordon Broadfoot
Dioramas bring life to your helicopter operations.
From the first week that I flew a small co-axial helicopter, I knew that I wanted to fly more authentic-styled helicopters and have proper landing zones (LZ’s) for the missions I intended to fly indoors with micro-sized helis.
I can certainly appreciate a big open floor with a soft rug to land on, like a big open field of deep grass. That is...
Page 516 of 773
New Posts
Loading...
XenPorta 2 PRO
© Jason Axelrod from 8WAYRUN.COM
test
