Notice Oxy 2

Discussion in 'Other Brands' started by Richard Knapp, Mar 18, 2017.

By Richard Knapp on Mar 18, 2017 at 6:11 AM
  1. Richard Knapp

    Richard Knapp Active Member

    Joined:
    Sep 21, 2016
    Messages:
    179
    Likes Received:
    72
    OXY 2 just release the OXY 2 FE.
    They are taking Pre-Orders now. Just e-mail
    orders@lynxheli.com

    The only 200 size kit on market as far as I know.
    Here is a size comparison.

    234.jpg


    Maybe we can get a OXY 2 mini forum on here?
     

Comments

Discussion in 'Other Brands' started by Richard Knapp, Mar 18, 2017.

    1. hgnimda

      hgnimda Ray - Administrator Staff Member

      Joined:
      Mar 1, 2014
      Messages:
      628
      Likes Received:
      479
      You certainly can! Leave it with me!
       
    2. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Well I crashed my 2 in a test today.

      I did a test hover down stairs and got caught in wall wash. Crashed my OXY 2 into the cement wall. Hit TH in time.
      Damage:
      Elevator servo has a glitch now (gears are still good but it needs replacing )
      Servo saver arm (later found servo had same jump at full + pitch )
      Main shaft has a micro bend but enough to make a vib.
      Spindle

      Every thing else is good.
      Not bad for hitting a cement wall. They up held there OXY 3 low parts count in crash reputation.
       
    3. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Photos curtesy of Chris Reibert

      17342820_1439997489365517_4513074128003802372_n.jpg 17458143_1439997502698849_2798548224842727961_n.jpg 17425967_1439997556032177_6611575522907972503_n.jpg 17457336_1441156829249583_5281648704026381660_n.jpg 17457336_1441156829249583_5281648704026381660_n.jpg 17458037_1441156845916248_7633092134692030923_n.jpg
       

      Attached Files:

    4. smakmeharder

      smakmeharder Administrator

      Joined:
      Mar 3, 2014
      Messages:
      4,825
      Likes Received:
      3,095
      Dam that looks like a pocket rocket. Not bad damage. Would the motor strip the main gear normally?
       
    5. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
    6. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      After the first 100 oxy2 factory edition shipped.. Luca read and digest all the commemt you all give in different forum..

      For who want to know what Luca think.. here his words..

      Thanks to all for your comment. Oxy2 standard edition is now under rigid rest.. my desire is to made asap a full plastic oxy2 with cf frame some cnc parts per need and plastic lexan canopy to get lower kit cost and reduce approximately 35g leaving the option to replace parts and use the factory editi...on one as upgrade for who like it. New motor Eox 1911 for 3 or 4 s is also in pre series production and will have 50% more porer than 1611 and little more power than 1910 actually available from t rex 250.. carry bag and stetch kit 210 also will check and tested soon and the cube edition just start to be designed.. I live a dream.. you know.. and I will doy best to made it uppen asap. About 3d printed parts actually used.. the main reason why I desided to go with it now is to release the kit that was ready from month but cannot be released cause issue on the plastic injectect part ... Battery tray and boom clamp.. about main gear we open mold already and once avilable 2 main gear injectect will cost less than cnc.. Plastic tail linkage are now reamed one by one in factory to give the smothness tgat some one want.. honestly I know that tge actual mesh can assure more than 1000 fly without play.. because we tested.. but I listen also user opinion.. reamer tool is also in production..
      I apologize is someone of you get some wrong parts on kit.. this depend on my team.. but also my procedures now are more strict and fool proven in order to learn fast and evoid any issue.. box I also updated because first one was good but not like my originally file.. than because I dont like flex to the mistake.. new one is now in printing.. any comment or any suggestion.. are like always welcome to me.. last thinks.. please dont compare heli with heli.. model with model.. I know is normal instinct but.. experience teach me.. never compare.. buy what you like and than after you buy and tested per need you can say.. cannot compare model on paper.. cannot is a big mistake.. like compare apple with orange.. thrust me is the same.. even same brand.. is not to compare each individual project is to complocated inside to be compared.. I feel very bad when you compare my product with other brand before fly it.. and even after.. if you like you love if ypu dont you hate.. Thanks for listening..
       
    7. smakmeharder

      smakmeharder Administrator

      Joined:
      Mar 3, 2014
      Messages:
      4,825
      Likes Received:
      3,095
      Here is my feedback Richard.

      I have flown micros for a LONG time - could even piroflip a mcpx (NO bl) which is interesting to say the least. These are the things that i found most important for micros.

      my desire is to made asap a full plastic oxy2 with cf frame some cnc parts per need and plastic lexan canopy to get lower kit cost and reduce approximately 35g leaving the option to replace parts and use the factory editi...on one as upgrade for who like it.

      YES LIGHTER IS REALLY IMPORTANT. Because it means less kenetic energy - better smak and better response BUT - it should be REALLY TOUGH so it can take a hammering! IE full speed crash into concrete should hopefully NOT break frame.

      New motor Eox 1911 for 3 or 4 s is also in pre series production and will have 50% more porer than 1611 and little more power than 1910 actually available from t rex 250.. carry bag and stetch kit 210 also will check and tested soon and the cube edition just start to be designed.. I live a dream.. you know.. and I will doy best to made it uppen asap.

      MORE POWER Is awesome. You need POP!

      Battery tray and boom clamp.. about main gear we open mold already and once avilable 2 main gear injectect will cost less than cnc.. Plastic tail linkage are now reamed one by one in factory to give the smothness tgat some one want.. honestly I know that tge actual mesh can assure more than 1000 fly without play.. because we tested.. but I listen also user opinion.. reamer tool is also in production..

      OK Battery tray - Quck battery insertion and release and holding is important. Even better if you dont need to remove canopy. But i gather that is a pipe dream.

      CANOPY should be TOUGH so it protects - can take a beating and provide great visuals.

      The TAIL IS CRITICAL - so often i find tail control in micros to be a real issue. Its never fast enough and the holding is never precise. If you can nail this and make a simple to work and super tough tail then you have hit the holy grail.

      GENERAL NOTES:
      To me the perfect micro is this! Highly visible - incredibly strong - can take a real beating - very powerful for its size SIMPLE AND FAST to work on IF you need to repair. If its super strong it can be more expensive . If not super strong it should be super simple to repair and relatively cheap to buy parts. SERVOS should be quality and not break on crashes - mcpx had this feature - the servos were good when they were new but wore out quickly often providing glitch y performance.

      I know luca can often weave magic with his designs....
       
    8. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
       
    9. smakmeharder

      smakmeharder Administrator

      Joined:
      Mar 3, 2014
      Messages:
      4,825
      Likes Received:
      3,095
      Hmmm Mainshaft seems to be resonably easy. It looks tough....IE it could resist a descent crash.....
       
    10. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      I got stuck in wash and caught a cement wall at a HS of 3800 and only micro bend in main shaft and bent spindle. I had to replace a servo is developed a twitch at max pitch.

      This is the shaft replacement from that crash.
       
    11. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Servo saver worked , I think the servo was a week one.
       
    12. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      I have been quiet lately but I have many things I have been dealing with.
      I'll just leave this flight from Aaron Wolf here. ;)

       
    13. ChopDrifter

      ChopDrifter Member

      Joined:
      Sep 3, 2017
      Messages:
      33
      Likes Received:
      7
    14. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      I love my 2 so much I'm going to start building a 2nd one as soon as the kit comes in. :)
      This one with the new EOX 1911 motor.
       
    15. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Aron Prong:

      Oxy 2 Qube... the best micro size setup I've ever tried...

      Hobbywing 30A ESC
      Lynx Eox 1611 Motor (10t pinion)
      Lynx micro servos

      Spektrum tail servo
      ubrain2

      3800-4200-4600 Headspeed

       
    16. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Pinions for the new EOX 1911
      2.5 shaft.
      11t, 12T, 13T are now available.

      upload_2017-9-15_11-56-36.jpeg
       
    17. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Henrik Clausen enjoying his OXY 2 FE

       
      Last edited: Sep 21, 2017
    18. ChopDrifter

      ChopDrifter Member

      Joined:
      Sep 3, 2017
      Messages:
      33
      Likes Received:
      7
      very nice flying, love the low to the ground smack, good to be young. So precise movements
       
    19. Richard Knapp

      Richard Knapp Active Member

      Joined:
      Sep 21, 2016
      Messages:
      179
      Likes Received:
      72
      Kyle Dahl
      September 22 at 8:23pm ·
      This is only a HANDFUL of all the crazy stunts I did with my OXY in my garden! Make sure you ***CHECK OUT THE FULL YOUTUBE VIDEO*** on my channel to see all the craziness and the eventual Crash!!!
      ** ** LIKE and SHARE if you were impressed and COMMENT your favorite STUNT!!! [​IMG]

       
      Last edited: Sep 27, 2017

Share This Page

test

    About Us

    Just like you, Heligods staff are regular everyday fliers. Join our forum and participate in what will become the worlds greatest rc helicopter forum..

    Credits:

    A big thank you to the following people who helped us put together this site:

    Pope Francis

    Deli Lama

    George Bush

    Gene Simmons (aka Crash)