Close Sidebar
Heligods - The International RC Helicopter Forum
Learn to Fly 3d RC Helicopters
Set Up Steps:
Before you start, you really need a dial indicator to do this right, with a sleeve that slips down over the main shaft and sits on top of the swash ball, so you can sit the leaver of the dial indicator on the top of the sleeve. Then viewing the dial indicator window, you can dial out the interactions. Some people also mark the shaft with a marker, but it's not as accurate and gets very messy very quick.
1. Enter the Swash Menu and go to NTR This locks the model's servo in exact neutral
2. Locate the mounting point for each ball link on the servo driving the swashplate at...
Before you start, you really need a dial indicator to do this right, with a sleeve that slips down over the main shaft and sits on top of the swash ball, so you can sit the leaver of the dial indicator on the top of the sleeve. Then viewing the dial indicator window, you can dial out the interactions. Some people also mark the shaft with a marker, but it's not as accurate and gets very messy very quick.
1. Enter the Swash Menu and go to NTR This locks the model's servo in exact neutral
2. Locate the mounting point for each ball link on the servo driving the swashplate at...
Video
Heligods Rock
What else can I say?
What a shame.. After @Manyc finished building his brand new goblin carbon I became wanting... wanting for some carbon. I saw my chance today when @Manyc decided to fly without a battery strap attached properly and with no canopy! Of course after a few piros - BATTERY EJECTION, one of my favorite crashes (just ask @smakmeharder). Unfortunately the batteries missed the blades and @Manyc autoed the heli down to the ground safely without any damage.. I had a spot reserved in my graveyard for a nice new goblin carbon. Next...
Lynx Heli Innovations is always looking for a better way of doing things.
Lynx redesign the standard Mini Protos motor pinion, and have on offer an alternative pinion made from solid hardened carbon steel.
After a lot of people where having issue with one way bearing falling Lynx's decided on a better solution, do away with the one way! Suppress the one way function, in order to offer a pinion, without any compromise or load and wear resistance.
FEATURES:
- 100% compatible with standard Mini Protos parts.
- Super Precise CNC pinion tooth cut for the smooth transmission
- Solid Carbon...
Lynx redesign the standard Mini Protos motor pinion, and have on offer an alternative pinion made from solid hardened carbon steel.
After a lot of people where having issue with one way bearing falling Lynx's decided on a better solution, do away with the one way! Suppress the one way function, in order to offer a pinion, without any compromise or load and wear resistance.
FEATURES:
- 100% compatible with standard Mini Protos parts.
- Super Precise CNC pinion tooth cut for the smooth transmission
- Solid Carbon...
Darrick Chekas with some information about Futaba R7003SB External Voltage Mode Setup Reported by: dchekas
Continue reading...
Continue reading...
Check out this new feature in AccuRC v1.3 How to set up a channel 5 switch to switch on/off bailout and also how to set up the flight mode switching using either a two position switch or a three position switch. Reported by: Ashley Davis
Continue reading...
Continue reading...
I fly this beast since January. In ten months I crashed it only once. It prooved to be very reliable heli with some Align parts. If you type in Google "Gartt 800" you will find whole story of this project. Now I can do rainbows and tic-tocs with this 800.
I am not the only one. My friend Benji after reading my thread on Polish forum also built 800 based on Assault 700 kit. He also flown it for months without issues. Actually idea to stretch it to 800 was mine but Benji was first to maiden it with 800mm blades.
Idea was simple. Get cheap frame. Put $30 Align stretch kit including longer...
I am not the only one. My friend Benji after reading my thread on Polish forum also built 800 based on Assault 700 kit. He also flown it for months without issues. Actually idea to stretch it to 800 was mine but Benji was first to maiden it with 800mm blades.
Idea was simple. Get cheap frame. Put $30 Align stretch kit including longer...
I sinned posting on William James forum. Looks like I am not welcome there anymore... 
Let me just link one last thread:
http://www.helifreak.com/showthread.php?t=655277
I really do not like this yankee propaganda.
You guys and gals are much nicer!
Let me just link one last thread:
http://www.helifreak.com/showthread.php?t=655277
I really do not like this yankee propaganda.
You guys and gals are much nicer!
Page 611 of 774
New Posts
Loading...
XenPorta 2 PRO
© Jason Axelrod from 8WAYRUN.COM
test
