Close Sidebar
Heligods - The International RC Helicopter Forum
Learn to Fly 3d RC Helicopters
Hi all, I have bought and sold gear on ArcHeli and was told to post on HG as it's a great community by a fellow GMAC member.
I have some gear to sell which was taken off my just sold TSA 700E. I have downsized to a 450 so no longer need it.
.....
SOLD: FOUR 3 month old 60C 4400 Revolectrix lipos with under 15 flights (13-15); only charged at 1C, storage charged after flight and never run under 3.76v. $280 for all 4.
These lipos cost $USD110 each plus shipping.
AR7200BX BeastX FBL unit $155
Spektrum 8000 Receiver $40
Align DS615/655 servos $120 - the cyclics have 100 flights...
I have some gear to sell which was taken off my just sold TSA 700E. I have downsized to a 450 so no longer need it.
.....
SOLD: FOUR 3 month old 60C 4400 Revolectrix lipos with under 15 flights (13-15); only charged at 1C, storage charged after flight and never run under 3.76v. $280 for all 4.
These lipos cost $USD110 each plus shipping.
AR7200BX BeastX FBL unit $155
Spektrum 8000 Receiver $40
Align DS615/655 servos $120 - the cyclics have 100 flights...
Question?
What Is Better, Belt Or Torque Tube?
I have allways wondered what is better - a belt system or a torque tube system. Goblins run belts, align run torque tubes.... What do you think?
I have decided to sell this great little heli. It has served me well. Both are near new as I bought 1 new kit and and rebuilt 90% of my second one with new parts too. ONLY FRAMES AND PARTS AS IN PICS AND MENTIONED BELOW.
$395 + POST for all below
Mini Protos 1: Fresh rebuild mostly new parts
Stretch kit
Alloy upgrades
Stock 6S motor
MSH plastic tails
Mini Protos 2: Was a fresh build from new kit bought recently, but used main block, swashplate, and frames for Mini protos 1. But it is a complete frame.
Non-stretch
No alloy upgrades
Cheap 325mm main blades
Low rider head...
$395 + POST for all below
Mini Protos 1: Fresh rebuild mostly new parts
Stretch kit
Alloy upgrades
Stock 6S motor
MSH plastic tails
Mini Protos 2: Was a fresh build from new kit bought recently, but used main block, swashplate, and frames for Mini protos 1. But it is a complete frame.
Non-stretch
No alloy upgrades
Cheap 325mm main blades
Low rider head...
For Sale: AU
Canomod T-rex 700e Canopy (brand New)
For Sale: AU
Bnib Align 3gx
For Sale: AU
Spektrum Dx8 Mode 2 Transmitter
Info
Scorpion Esc Woes
So......I`m at the field today with a fellow helicopter pilot, waiting for the rain to stop. As we were waiting in the pilot house, he asked me to charge a few packs for him, and go over his Goblin 570...to make sure he had it set up right. Which he did.
The rain finally stopped after about an hour, and we ventured over to the flight line. He did the maiden flight on his 570, and then I started getting mine ready to fly. I put the packs in, turned everything on, and plugged in the ESC. Here is where my woes kick in. Instead of getting the two beeps to signal the ESC had armed, I get the...
The rain finally stopped after about an hour, and we ventured over to the flight line. He did the maiden flight on his 570, and then I started getting mine ready to fly. I put the packs in, turned everything on, and plugged in the ESC. Here is where my woes kick in. Instead of getting the two beeps to signal the ESC had armed, I get the...
Page 620 of 774
XenPorta 2 PRO
© Jason Axelrod from 8WAYRUN.COM
test