Close Sidebar
by Chris Reibert photos by Jenni Orebaugh
At the young age of 20, Jamie Robertson is one of the world’s leading RC helicopter pilots. Jamie was the winner of the 2009, 2011 and 2013 XFC as well as 2011 3D Masters and the 2012 and 2013 Zone Knockout (England), and he is one of only a few pilots to win these two events in the same year. Jamie also took third in 2010 XFC and second in 2012 XFC. I was lucky enough to get the chance to interview Jamie to learn about his life in our hobby. If...
Two fingers on the control stick (thumb on top, index finger on the side for support) naturally enable pilots to more precisely control their inputs.
By Dave Scott
A proper helicopter/radio setup is certainly a distinct advantage, but nothing has proven to facilitate better flying during 1st U.S. R/C Flight School training courses as effectively as using two fingers on the control sticks and increasing spring tension in the radio to improve a pilot’s ability to precisely control the...
Heligods - The International RC Helicopter Forum
Learn to Fly 3d RC Helicopters
Hi guys
As I was more unlucky then lucky with Align because of quality differences of their shipping outputs and their "we are sorry to hear about your problems" politics in customer service I want to sell all my Align helis and build something new. Something realy precise, durable and with the ability for very low AND very high headspeeds. The brand should be well known because of the availability of spare parts. So no clones or small brands please. Im looking for a model size 600 upwards.
Im getting more and more into the world of hard smacking...
As I was more unlucky then lucky with Align because of quality differences of their shipping outputs and their "we are sorry to hear about your problems" politics in customer service I want to sell all my Align helis and build something new. Something realy precise, durable and with the ability for very low AND very high headspeeds. The brand should be well known because of the availability of spare parts. So no clones or small brands please. Im looking for a model size 600 upwards.
Im getting more and more into the world of hard smacking...
by Chris Reibert photos by Jenni Orebaugh
At the young age of 20, Jamie Robertson is one of the world’s leading RC helicopter pilots. Jamie was the winner of the 2009, 2011 and 2013 XFC as well as 2011 3D Masters and the 2012 and 2013 Zone Knockout (England), and he is one of only a few pilots to win these two events in the same year. Jamie also took third in 2010 XFC and second in 2012 XFC. I was lucky enough to get the chance to interview Jamie to learn about his life in our hobby. If...
Sold
Chase 360
SOLD - KDS Chase 360 purchased new in box by me.
- Scorpion HK 2520-1880 KV
- Hobbywing 50A Platinum speedy with ESC
- KDS N320S cyclic & N320T tail servos
- Upgraded to full latest spec belts and pulleys
- Mini VBar with Pro
- Edge V2 353mm main blades
- Plastic tails
Includes 3 x 6S batteries and a bunch of spare parts.
Add you own receiver to fly or I can add a Futaba SBUS receiver for an additional $50.
$500.00
Pickup will be free - Sunshine Coast Qld or shipping to be at cost for buyer.
Alternatively delivery can be made from Sunshine Coast to NSW/Qld border.
Selling because I...
- Scorpion HK 2520-1880 KV
- Hobbywing 50A Platinum speedy with ESC
- KDS N320S cyclic & N320T tail servos
- Upgraded to full latest spec belts and pulleys
- Mini VBar with Pro
- Edge V2 353mm main blades
- Plastic tails
Includes 3 x 6S batteries and a bunch of spare parts.
Add you own receiver to fly or I can add a Futaba SBUS receiver for an additional $50.
$500.00
Pickup will be free - Sunshine Coast Qld or shipping to be at cost for buyer.
Alternatively delivery can be made from Sunshine Coast to NSW/Qld border.
Selling because I...
Sold
Tt 56 & Redline Pipe
SOLD
Thunder Tiger Redline 56 heli engine & 3D pipe.
Never started. Was purchased as a spare engine & pipe but don't need it now.
Comes complete with manual, spare head & exhaust gaskets, tools & stickers.
$180 posted in Australia
Advertised elsewhere
Thunder Tiger Redline 56 heli engine & 3D pipe.
Never started. Was purchased as a spare engine & pipe but don't need it now.
Comes complete with manual, spare head & exhaust gaskets, tools & stickers.
$180 posted in Australia
Advertised elsewhere
**SOLD** Mikado Logo 700 Xxtreme complete. Flies beautifully and has never been crashed.
- Full frame and electronics (no receiver although a 7003 FASSTest one can be added for additional cost)
- Scorpion HK 4525-520 Ultimate XXtreme edition
- YGE 160 HV XXtreme edition with VStabi Governor
- VBar 5.3 Silverline Pro Edition
- Torq HV servos
- Western Robotics BEC
- Scorpion back up guard
- RC Sense current sensor fitted (telemetry for Futaba 14SG/18MZ)
- Edge 713 mains
- Edge 115 tails
- Yellow & red canopy
Selling to fund another purchase that I have my eye on.
$1750 plus freight to...
- Full frame and electronics (no receiver although a 7003 FASSTest one can be added for additional cost)
- Scorpion HK 4525-520 Ultimate XXtreme edition
- YGE 160 HV XXtreme edition with VStabi Governor
- VBar 5.3 Silverline Pro Edition
- Torq HV servos
- Western Robotics BEC
- Scorpion back up guard
- RC Sense current sensor fitted (telemetry for Futaba 14SG/18MZ)
- Edge 713 mains
- Edge 115 tails
- Yellow & red canopy
Selling to fund another purchase that I have my eye on.
$1750 plus freight to...
Interesting video! Enjoy
Two fingers on the control stick (thumb on top, index finger on the side for support) naturally enable pilots to more precisely control their inputs.
By Dave Scott
A proper helicopter/radio setup is certainly a distinct advantage, but nothing has proven to facilitate better flying during 1st U.S. R/C Flight School training courses as effectively as using two fingers on the control sticks and increasing spring tension in the radio to improve a pilot’s ability to precisely control the...
Info
Bricked Kosmik...
Well I don't know about anyone else, but I've had a shitehouse day... Went to update my KOSMIK 200 with the latest firmware so that I could change the BEC voltage and now she's bricked.
Okay then. I've prefixed this thread as 'Info', so I shall explain WTF happened. I'm in a bit of a story telling mood, so if you just want the cold hard facts without any if the dribble then proceed to the last paragraph in this post. Please also note that this really only applies to old KOSMIKS from the first batch with V2.6 firmware (possibly 3.0 as well). My Kosmiks serial no. is 00131....
Okay then. I've prefixed this thread as 'Info', so I shall explain WTF happened. I'm in a bit of a story telling mood, so if you just want the cold hard facts without any if the dribble then proceed to the last paragraph in this post. Please also note that this really only applies to old KOSMIKS from the first batch with V2.6 firmware (possibly 3.0 as well). My Kosmiks serial no. is 00131....
Info
New Fbl On The Way
Stole this from archeli.. Who got it from heli freak.. Either way in very interested..
Thomas (the man behind the Brain/ikon) split with MHS and has been working on a new project and has developed two new fbl controllers which will soon be released, the Neuron and it's big brother which hasn't been named yet. With some updated hardware and Thomas's programing skills this promises to be a fbl to keep an eye on. This is the info from HF
NEURON<
Hardware :
Latest generation, 9 axis sensor (MPU-9250)
Latest generation...
Thomas (the man behind the Brain/ikon) split with MHS and has been working on a new project and has developed two new fbl controllers which will soon be released, the Neuron and it's big brother which hasn't been named yet. With some updated hardware and Thomas's programing skills this promises to be a fbl to keep an eye on. This is the info from HF
NEURON<
Hardware :
Latest generation, 9 axis sensor (MPU-9250)
Latest generation...
Page 513 of 774
XenPorta 2 PRO
© Jason Axelrod from 8WAYRUN.COM
test